Setup Linksys Wireless router in PPPOE

Configure Linksys Router in PPPOE mode

Here in the below instructions we have used linksys WRT54G router, but the steps remain the same for all linksys routers.

Step 1: Make sure that you can go online by connecting your computer to the modem (Without connecting WRT54G router in the network).

Step 2: Connect your computer to the one of the LAN port of WRT54G.

Step 3: Connect the modem to the WAN Port of WRT54G and all devices should be powered on.



Linksys Wireless G Router

Step 4: Open Internet Explorer and type the default IP Address of the Router. The default IP address of WRT54G is 192.168.1.1 and press enter.





Step 5: After Entering the default user name and Password you will log on to the Router Setup page.

Default user name : {mo user name}
Default Password : admin






Update: To configure in PPPOE there is no need to change the current Local IP Address.

Step 6: On setup page select PPPOE instead of "Automatic Configuration DHCP"





Step 7: Enter the user name and Password provided by your Internet Service Provider and click on save.





Step 8: Click on status bar and click on connect button.